Small Portable Cartridge (SPC Series)

The SPC Series is mainly designed to be used as a portable weld fume dust collector with the use of one or two extraction arms.  By removing the arm and adding either the downdraft table or backdraft hood, the SPC can collect a variety of dust.

  • 1000, 1200, 2000 or 2500 Nominal CFM
  • Single-phase 1.5 HP or three-phase 3 HP or 5 HP TEFC motor with switch, cord on 1.5 HP only
  • Direct drive backward inclined airfoil non-overloading fan
  • 177 or 295 square feet of filter area providing filter efficiency of 99% at 0.5 microns
  • 80/20 Polyester Blend flame retardent HEPA-like cartridge filter
  • Optional cartridge filters are either a washable spun bond or NANO Fiber
  • Optional HEPA or Activated Carbon After-Filters are available
  • Internal baffle protecting cartridge filter
  • Optional metal mesh spark arrester
  • Manual push button pulse-jet filter cleaning system or on-demand auto cleaning (Smart Pulse)
  • Easy tool-less filter change-out
  • Mini-helic filter change-out guage
  • Dust collection drawer
  • 6- or 8-inch by 10-foot externally supported extraction arm
  • 10-inch rear wheels and 5 inch front swivel wheels
  • 11- and 14-guage heavy duty metal construction
  • Kelly Green industrialized textured powder coat finish

Spec Sheet & Manual Request

Please fill out the form below and the Small Portable Cartridge Spec Sheet & Manual will be emailed to you.

Unit HP Sq. Ft. CFM Dimensions
SPC-10001.51771000 @ 5.5" WG36 x 20 x 53.5
SPC-12001.52951000 @ 5.5" WG47 x 20 x 53.5
SPC-20003.02952000 @ 5.5" WG47 x 20 x 53.5
SPC-25005.02952750 @ 5.5" WG47 x 20 x 55.5